海战场信息系统和武器系统综合仿真技术研究

本文分析了海战场信息系统仿真的特点,介绍了可以应用于海战场信息系统和武器系统综合仿真的高层体系结构(HLA)技术,描述了澳大利亚国防科学与技术组织(DSTO)基于HLA技术的虚拟舰艇概念和潜在的应用,以及虚拟舰艇结构和层次化联邦共同体概念的设计方法。     

Dynamic impact protective body armour: A comprehensive appraisal on panel engineering design and its prospective materials

Personal body armour is one of the most important pieces of equipment to protect human beings from various critical and fatal injuries. In today’s modern world, various organizations including law enforcement and security service have made it mandatory for their personnel to wear personal protection system while on field duty. However, the systems should comprise an improved ballistic performance, light-weighted, flexible as well as comfortable panel not only to be accepted with a wider range but also for effective performances of the consumer. Generally, the overall performances of the protective body armour could be affected by various parameters including armour design techniques, type of materials used and finishing of the panels. The current paper aims to critically review state-of-art for armour panel design techniques and the different perspective body armour materials. The paper starts by discussing the different body armour and its category. Later, the different states of technology for armour panel design (mostly for women), its problems and the possible solutions will be cited. Later, the commonly used different polymeric fibrous and the future possible advanced materials including carbon nanotube (CNT), Graphene CNT and shear thickening fluids (STFs) treated materials for developing the reinforced body armour panel will be discussed. The authors believe that this paper will enlighten useful guidelines and procedures about the different panel design techniques and current and promising future materials for researchers, designers, engineers and manufacturers working on the impact resistance body armour field.     

Hyperspectral imaging and remote trace detection of cis-1,3,4,6-tetranitrooctahydroimidazo-[4,5 d] imidazole (BCHMX) compared with traditional explosives using laser induced fluorescence

cis-1,3,4,6-Tetranitrooctahydroimidazo-[4,5 d] imidazole (BCHMX) is an advanced energetic compound that expected to spread worldwide in the near future. Since, no approved remote detection methods were reported in current literature for this material, we performed hyper-spectral imaging and laser induced fluorescence (LIF) to a BCHMX sample under low laser fluence for determining the optimum laser wavelength used in any future BCHMX-LIF based remote detection systems. For this purpose, an experimental setup consisted of a sun spectrum lamp and hyper-spectral camera was built to illuminate and image white powder samples of BCHMX in comparison with the traditional explosives, HMX (1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane), RDX (1,3,5-trinitro-1,3,5-triazacyclohexane), PETN (2,2-Bis[(nitroxy)methyl]propane-1,3-diyldinitrate). The imaging reveals strong BCHMX sample absorption contrast among other samples at wavelength ranging from 400 to 410 nm. When light source was replaced by a 405 nm laser diode illuminator, a strong BCHMX sample LIF at the spectral range from 425 to 700 nm was observed under low laser fluence condition of 0.1 mJ/cm². Finally, we demonstrated successfully the ability of the 405 nm LIF and the hyperspectral imaging technique to detect finger print traces of BCHMX on white cellulose fabric from a distance of 15 m and a detection limit of 1 μg/cm².     

Experimental and numerical investigations of interface properties of Ti6Al4V/CP-Ti/Copper composite plate prepared by explosive welding

Explosive welding technique is widely used in many industries. This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods. Interlayer plays an important role to improve the welding quality and control energy loss during the collision process. In this paper, the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer. Microstructure details of welded composite plate were observed through optical and scanning electron microscope. Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices. Moreover, the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of Cu–Ti, i.e. CuTi, Cu₂Ti, CuTi₂, Cu₄Ti, etc. To study the mechanical properties of composite plates, mechanical tests were conducted, including the tensile test, bending test, shear test and Vickers hardness test. Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method, Euler and Arbitrary Lagrangian-Eulerian method. The multi-physics process of explosive welding, including detonation, jetting and interface morphology, was observed with simulation. Moreover, simulated plastic strain, temperature and pressure profiles were analysed to understand the welding conditions. Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates. At the collision point, both alloys behave like fluids, resulting in the formation of a wavy morphology with vortices, which is in good agreement with the experimental results.     

Optimization of buckling load for laminated composite plates using adaptive Kriging-improved PSO: A novel hybrid intelligent method

An effective hybrid optimization method is proposed by integrating an adaptive Kriging (A-Kriging) into an improved partial swarm optimization algorithm (IPSO) to give a so-called A-Kriging-IPSO for maxi-mizing the buckling load of laminated composite plates (LCPs) under uniaxial and biaxial compressions. In this method, a novel iterative adaptive Kriging model, which is structured using two training sample sets as active and adaptive points, is utilized to directly predict the buckling load of the LCPs and to improve the efficiency of the optimization process. The active points are selected from the initial data set while the adaptive points are generated using the radial random-based convex samples. The cell-based smoothed discrete shear gap method (CS-DSG3) is employed to analyze the buckling behavior of the LCPs to provide the response of adaptive and input data sets. The buckling load of the LCPs is maximized by utilizing the IPSO algorithm. To demonstrate the efficiency and accuracy of the proposed methodology, the LCPs with different layers (2, 3, 4, and 10 layers), boundary conditions, aspect ratios and load patterns (biaxial and uniaxial loads) are investigated. The results obtained by proposed method are in good agreement with the literature results, but with less computational burden. By applying adaptive radial Kriging model, the accurate optimal results-based predictions of the buckling load are obtained for the studied LCPs.     

Impact of atmospheric turbulence on coherent beam combining for laser weapon systems

The performance of a laser weapon system based on coherent beam combining (CBC) depends on its propagation properties in the atmosphere. In this study, an analytical model based on partial coherent beam combining (PCBC) for assumed coherence coefficients between beams in a CBC lattice was developed. The Kolmogorov model of atmospheric turbulence and the Hufnagel-Valley model of Cn2 dependence on atmospheric parameters were implemented. Novel simplified metrics were proposed to assess the CBC performance. Several beam profiles (super-Gaussian, truncated Gaussian, etc.) and ge-ometries were analyzed in terms of maximal intensity in the far field. An approximate formula for PCBC efficiency dependent on the Fried radius was proposed. The results of CBC modeling were compared to those of the Gaussian beam propagation model in a turbulent atmosphere. The dependence of CBC performance on the Cn2 parameter, range, and elevation angle was analyzed. It could be concluded that the application of CBC for medium and long range propagation is impractical without an effective adaptive optics system.     

Partial penetration of annular grooved projectiles impacting ductile metal targets

Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.     

Damage to aircraft composite structures caused by directed energy system: A literature review

This paper presents a comprehensive review of the research studies on direct energy system effect on aircraft composite structures to develop a good understanding of state-of-the-art research and devel-opment in this area. The review begins with the application of composite materials in the aircraft structures and highlights their particular areas of application and limitations. An overview of directed energy system is given. Some of the commonly used systems in this category are discussed and the working principles of laser energy systems are described. The experimental and numerical studies re-ported regarding the aircraft composite structures subject to the effect of directed energy systems, especially the laser systems are reviewed in detail. In particularly, the general effects of laser systems and the relevant damage mechanisms against the composite structures are reported. The review draws attention to the recent research and findings in this field and is expected to guide engineers/researchers in future theoretical, numerical, and experimental studies.     

二维衰减谐波估计的四阶混合累积量方法

针对二维衰减谐波估计方法在大样本容量条件下计算量过大的问题,提出了一种基于二维四阶混合累积量的ESPRIT方法。在不影响估计精度的前提下,通过保持特征矩阵结构不变,有效地减小了算法的计算量。利用四阶混合累积量对高斯噪声的自动抑制,降低了参数估计的信噪比门限并提高了估计精度。仿真实验表明,在高斯色噪声条件下该方法的计算效率和估计性能优于现有方法。     

PPQ-b-PEG刚柔嵌段共聚物的合成及热稳定性

以聚乙二醇单甲醚、丁二酸酐、4-氨基苯乙酮、5-乙酰基-2-氨基二苯甲酮为原料合成了以聚苯基喹啉(PPQ)为硬段、聚乙二醇(PEG)为软段的"刚棒—线团"两嵌段共聚物PPQ b PEG,通过IR、1HNMR对其结构进行了表征,并对PPQ b PEG嵌段共聚物的热稳定性进行研究,结果表明:PPQ b PEG(d)的热稳定性高,PPQ b PEG起始的分解温度为250℃,在250～400℃失重很少,其失重率小于5%,在400～600℃才迅速失重,到620℃时彻底分解。